Home > Press > New material harvests energy from water vapor: Polymer film could be used in artificial muscle and to power micro- and nanoelectronic devices
Abstract:
MIT engineers have created a new polymer film that can generate electricity by drawing on a ubiquitous source: water vapor.
The new material changes its shape after absorbing tiny amounts of evaporated water, allowing it to repeatedly curl up and down. Harnessing this continuous motion could drive robotic limbs or generate enough electricity to power micro- and nanoelectronic devices, such as environmental sensors.
"With a sensor powered by a battery, you have to replace it periodically. If you have this device, you can harvest energy from the environment so you don't have to replace it very often," says Mingming Ma, a postdoc at MIT's David H. Koch Institute for Integrative Cancer Research and lead author of a paper describing the new material in the Jan. 11 issue of Science.
"We are very excited about this new material, and we expect as we achieve higher efficiency in converting mechanical energy into electricity, this material will find even broader applications," says Robert Langer, the David H. Koch Institute Professor at MIT and senior author of the paper. Those potential applications include large-scale, water-vapor-powered generators, or smaller generators to power wearable electronics.
Other authors of the Science paper are Koch Institute postdoc Liang Guo and Daniel Anderson, the Samuel A. Goldblith Associate Professor of Chemical Engineering and a member of the Koch Institute and MIT's Institute for Medical Engineering and Science.
Harvesting energy
The new film is made from an interlocking network of two different polymers. One of the polymers, polypyrrole, forms a hard but flexible matrix that provides structural support. The other polymer, polyol-borate, is a soft gel that swells when it absorbs water.
Previous efforts to make water-responsive films have used only polypyrrole, which shows a much weaker response on its own. "By incorporating the two different kinds of polymers, you can generate a much bigger displacement, as well as a stronger force," Guo says.
The film harvests energy found in the water gradient between dry and water-rich environments. When the 20-micrometer-thick film lies on a surface that contains even a small amount of moisture, the bottom layer absorbs evaporated water, forcing the film to curl away from the surface. Once the bottom of the film is exposed to air, it quickly releases the moisture, somersaults forward, and starts to curl up again. As this cycle is repeated, the continuous motion converts the chemical energy of the water gradient into mechanical energy.
Such films could act as either actuators (a type of motor) or generators. As an actuator, the material can be surprisingly powerful: The researchers demonstrated that a 25-milligram film can lift a load of glass slides 380 times its own weight, or transport a load of silver wires 10 times its own weight, by working as a potent water-powered "mini tractor." Using only water as an energy source, this film could replace the electricity-powered actuators now used to control small robotic limbs.
"It doesn't need a lot of water," Ma says. "A very small amount of moisture would be enough."
A key advantage of the new film is that it doesn't require manipulation of environmental conditions, as do actuators that respond to changes in temperature or acidity, says Ryan Hayward, an associate professor of polymer science and engineering at the University of Massachusetts at Amherst.
"What's really impressive about this work is that they were able to figure out a scheme where a gradient in humidity would cause the polymer to cyclically roll up, flip over and roll in the other direction, and were able to harness that energy to do work," says Hayward, who was not part of the research team.
Generating electricity
The mechanical energy generated by the material can also be converted into electricity by coupling the polymer film with a piezoelectric material, which converts mechanical stress to an electric charge. This system can generate an average power of 5.6 nanowatts, which can be stored in capacitors to power ultra-low-power microelectronic devices, such as temperature and humidity sensors.
If used to generate electricity on a larger scale, the film could harvest energy from the environment ? for example, while placed above a lake or river. Or, it could be attached to clothing, where the mere evaporation of sweat could fuel devices such as physiological monitoring sensors. "You could be running or exercising and generating power," Guo says.
On a smaller scale, the film could power microelectricalmechanical systems (MEMS), including environmental sensors, or even smaller devices, such as nanoelectronics. The researchers are now working to improve the efficiency of the conversion of mechanical energy to electrical energy, which could allow smaller films to power larger devices.
The research was funded by the National Heart, Lung, and Blood Institute Program of Excellence in Nanotechnology, the National Cancer Institute, and the Armed Forces Institute of Regenerative Medicine.
Anne Trafton, MIT News Office
####
For more information, please click here
Contacts:
Sarah McDonnell
617-253-8923
Copyright ? Massachusetts Institute of Technology
If you have a comment, please Contact us.Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
Bookmark:
News and information
How to treat heat like light: New approach using nanoparticle alloys allows heat to be focused or reflected just like electromagnetic waves January 11th, 2013
nano tech 2013 Exhibitor Profile: nano tech 2013 January 11th, 2013
Go Green Technologies Corp. Rolls Out Archoil Nanotechnology Product Line at NSSF Shot Show in Las Vegas January 11th, 2013
Aculon Announces Launch of NanoClear Stencil Treatment January 11th, 2013
Videos
The guide to biomolecular movie-making January 4th, 2013
Research update: Jumping droplets help heat transfer January 3rd, 2013
Highly stable graphene-based ultrathin films: a covalent protocol December 11th, 2012
Point of light: Caltech engineers invent light-focusing device that may lead to applications in computing, communications, and imaging December 7th, 2012
Govt.-Legislation/Regulation/Funding/Policy
New nanotech fiber: Robust handling, shocking performance: Nanotube fibers have unmatched combination of strength, conductivity, flexibility January 10th, 2013
Southampton scientist develops strongest, lightest glass nanofibres in the world January 10th, 2013
Scientists design, control movements of molecular motor: Study offers blueprint for creating machines at the nanoscale January 10th, 2013
Breakthrough Iron-based Superconductors Set New Performance Records: New fabrication method could advance technologies ranging from medical imaging devices to grid-scale energy storage January 9th, 2013
MEMS
Grant for Nanotech Researchers Provides Support & Funding January 10th, 2013
Dutch Company SolMateS sells first Piezoelectric Materials Deposition Machine PiezoFlare 1200 to SINTEF: SolMateS and SINTEF start close collaboration on PiezoMEMS development December 5th, 2012
Mirrorcle Technologies scanning MEMS mirrors deployed in portable OCT system November 21st, 2012
sp3 Diamond Technologies Enhances Wafer Scale Diamond Capabilities; Names Dr. Mario M. Pelella VP of Engineering November 13th, 2012
Nanomedicine
Grant for Nanotech Researchers Provides Support & Funding January 10th, 2013
Study quantifies the size of holes antibacterials create in cell walls to kill bacteria: Death on a nanometer scale January 10th, 2013
Newly-Synthesized Chitosan Network Nano Hydrogels Able to Carry Drugs January 9th, 2013
New American Chemical Society video series: Conversations with Celebrated Scientists January 9th, 2013
Sensors
Bottom-up approach provides first characterization of pyroelectric nanomaterials January 8th, 2013
Oxford Nanopore Announces Further Collaborations for Nanopore Sensing Technology January 8th, 2013
Iranian Scientists Produce Glutamate Biosensor by Using Carbon Nanotubes January 1st, 2013
Nanofibers Used in Production of Glucose Electrochemical Sensors December 31st, 2012
Nanoelectronics
Researchers demonstrate record-setting p-type transistor: New design for a basic component of all computer chips boasts the highest 'carry mobility' yet measured January 2nd, 2013
Dreidel-like dislocations lead to remarkable properties: Rice University theory predicts formation of conductive sub-nano ?wires? in two-dimensional materials December 15th, 2012
Highly stable graphene-based ultrathin films: a covalent protocol December 11th, 2012
European nanoelectronics industry proposes to invest 100 B? for innovation November 28th, 2012
Materials
How to treat heat like light: New approach using nanoparticle alloys allows heat to be focused or reflected just like electromagnetic waves January 11th, 2013
Go Green Technologies Corp. Rolls Out Archoil Nanotechnology Product Line at NSSF Shot Show in Las Vegas January 11th, 2013
Aculon Announces Launch of NanoClear Stencil Treatment January 11th, 2013
Southampton scientist develops strongest, lightest glass nanofibres in the world January 10th, 2013
Announcements
How to treat heat like light: New approach using nanoparticle alloys allows heat to be focused or reflected just like electromagnetic waves January 11th, 2013
nano tech 2013 Exhibitor Profile: nano tech 2013 January 11th, 2013
Go Green Technologies Corp. Rolls Out Archoil Nanotechnology Product Line at NSSF Shot Show in Las Vegas January 11th, 2013
Aculon Announces Launch of NanoClear Stencil Treatment January 11th, 2013
Military
How to treat heat like light: New approach using nanoparticle alloys allows heat to be focused or reflected just like electromagnetic waves January 11th, 2013
New nanotech fiber: Robust handling, shocking performance: Nanotube fibers have unmatched combination of strength, conductivity, flexibility January 10th, 2013
Bottom-up approach provides first characterization of pyroelectric nanomaterials January 8th, 2013
Another tiny miracle: Graphene oxide soaks up radioactive waste: Rice, Moscow State universities collaborate on solution to toxic groundwater woes January 8th, 2013
Energy
How to treat heat like light: New approach using nanoparticle alloys allows heat to be focused or reflected just like electromagnetic waves January 11th, 2013
Breakthrough Iron-based Superconductors Set New Performance Records: New fabrication method could advance technologies ranging from medical imaging devices to grid-scale energy storage January 9th, 2013
Iranian Scientists Increase Efficiency of Proton Membrane Cells January 8th, 2013
Bottom-up approach provides first characterization of pyroelectric nanomaterials January 8th, 2013
Water
New biosensor monitors water quality January 9th, 2013
Liquipel Adds Guarantee to Watersafe Nano-Coating Products at CES: Announced at Booth 25936, South Hall; Billions in Hardware Damage to Be Saved January 8th, 2013
Research update: Jumping droplets help heat transfer January 3rd, 2013
Tehran Hosts UN Meeting to Study Nanotechnology Challenges, Opportunities December 27th, 2012
Battery Technology/Capacitors/Generators/Piezoelectrics
mPhase Technologies Issued Patent No. 8,344,543 January 3rd, 2013
New funding to research 'super material' graphene December 28th, 2012
mPower Jump: Automotive Aftermarket Targeted December 19th, 2012
mPhase Technologies Profile Distributed by European Publication December 14th, 2012
Source: http://www.nanotech-now.com/news.cgi?story_id=46715
jennie garth space needle nashville predators king arthur king arthur there will be blood there will be blood
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.